男人去天堂在a线

  • <code id="ltyo9"></code><big id="ltyo9"><em id="ltyo9"></em></big><big id="ltyo9"><s id="ltyo9"></s></big>

    <strong id="ltyo9"></strong>

      <strike id="ltyo9"></strike>

        Se Habla Espa?ol

        Servicing the Hydraulic Rebuilding Industry

        Email: sales@ms-d.com
        En Espa?ol: luis@ms-d.com

        What's New

        Our Heavy Duty cylinder disassembly/assembly table and tooling designed for cylinders up to 24 to 30 inches in diameter. The table is designed with the top rail modified from 3/4" to 1-1/4" steel and is 26.5 ft. Long. A cylinder assist for disassembly and re assembly, a 24" heavy duty triple chain vise, a pressure boost system and 70K Nut Buster have been developed in conjunction with the heavy duty disassembly table.

        Download an informational brochure on the Disassembly Bench Model MSD-D-HD26

        We accept:

        Centerless Polisher | Rod Polisher

        Centerless Polisher | Rod Polisher

        MSD-P-15 | Center-Less Polishing Fixture

        A sturdy 2” x 4” tubular frame (standard frame length is 15 ft.) consists of two sets of polyurethane rollers — the gear motor drives one set, and the other set is easily adjusted to accommodate shafts from 1” to 14” OD.

        Machinery Service & Design, Inc., uses a “G & P 72” Abrasive belt polisher Model B372-3 as its polishing head. The head uses a 3” X 72” belt and is driven by a 3hp. 230/460 volt, 3 phase, 60 hz. Motor.

        A 5 HP head with a 3” x 90” belt is available to increase the time between belt changes.

        The polishing head is driven horizontally the length of the fixture by a vector A.C. drive. A rack and pinion drive system is used for smooth traversing of the carriage. The head is supported by four Teflon lined guides, which slide on aluminum support rails.

        Features and Benefits

        Centerless Polisher | Rod Polisher Centerless Polisher | Rod Polisher Centerless Polisher | Rod Polisher

        Electrical Package

        The electrical package will allow automatic reversing of polishing head with time delays at the end of strokes. This feature can be used to remove chrome build-ups on re-plated shafts. The magnet stops can be easily placed to reverse the polishing head at the end of the rod being polished.

        Centerless Polisher | Rod Polisher

        Centerless Polisher | Rod Polisher

        Magnetic stop for stroke positioning

        Stroke position limit switch

        Advantages

        • No need for centering or chucking rod in lathe. Faster setup time.
        • Clevis can be hung over end of fixture. Less setup required.
        • High micro-finish.
        • Can be used to check concentricity of shafts.
        • The belt polisher can be positioned for specialty processes,
          i.e. angle grinding and chamfers.

        Centerless Polisher | Rod Polisher

        Head can be tilted to grind chamfers or angled surfaces.

        Centerless Polisher | Rod Polisher

        Clevis can be hung over end of machine for faster, easier setup. No machining required.

        Centerless Polisher | Rod Polisher

        Levels repair welds on shafts. Head slides in and out to position wheel over rod for removing high spots.

        Polyurethane Rollers

        Gear motor drives one set of rollers

        Drive rollers - Idler rollers - Chain guard

        Polishing Head

        AC motor - Rack and pinion drive

        Teflon-lined guides and aluminum support rails

        男人去天堂在a线

      1. <code id="ltyo9"></code><big id="ltyo9"><em id="ltyo9"></em></big><big id="ltyo9"><s id="ltyo9"></s></big>

        <strong id="ltyo9"></strong>

          <strike id="ltyo9"></strike>